Descrizione
Myco Jordan contains an extremely concentrated form of the mycorrhizal fungi Globus intraradices (at 500 spores per gram). It creates a protective colony that forms an extra layer that around the root zone, increasing the surface area while warding off pathogens. This drastically improves nutrient uptake, which in turn speeds up overall plant growth.
- Beneficial Fungus
- Extend your plants reach
- Improved uptake of water and nutrients
- Promotes healthy, vigorous growth
- 100% organic
- Wettable powder – suitable for all systems
ELITE 91 - MYCO JORDAN INGREDIENTS:
CONTAINS NON-PLANT FOOD INGREDIENT(S):
Endomycorrhizae: Glomus Intraradices – 500 spores/g
No NPK value.
HOW TO USE ELITE91 MYCO JORDAN
Works in soil, coco or hydro. Start by pre-mixing the product with a small amount of water and gradually mixing in more water until the desired dilution rate is attained. Add to the reservoir. Keep agitated throughout the application. This will keep the mycorrhizal fungi in suspension for equal distribution when applying as a root drench.
- Seed treatment: Lightly dust each seed before planting.
- Cuttings: Add 1-2 teaspoon(s) per gallon of water. Pre-soak starter grow medium up to 15 min before placing new cuttings.
- Transplanting small plants: Lightly dust each plant site with 1-2 teaspoon(s) around the root zone or directly on the plant roots. Make sure the roots are in direct physical contact with the powder inoculum.
- Amending: Mix thoroughly 1-3 oz. with 2.5 cu.ft. of the growing substrate.
Slurry Tech: Mix 1/4LB to 1.1LB(s) MJ with 300ML – 1 litre RO water. However, the concentration of spores with MJ and your desired consistency of the slurry depends on how you like it to be, free-flowing or on the thicker side.
Mix the slurry very well each time (spores will settle if no consistent water movement) before dunking/swiping the root zone a quarter-inch to a half-inch of the Rockwool/starter cubes. Use this method and place your cuttings back in the tray/insert for 48-72 hours. After you have transplanted all your cuttings, dilute the remaining slurry with more water and apply generously to the grow medium.
Established Plants in Soil & Coco: Add 1-2 tablespoon(s) per gallon of water. Pour solution around the base of each plant site. Apply once up to 3 times a week until the 2nd or 3rd week of flower.
Hydroponics & Irrigation: Add 1/2 – 1 cup per 50 gallons of water. NOTE: Remove filters and use nozzles with a minimum of 18 mesh (1 mm) openings to avoid clogging. Apply once a week or with every nutrient change out until the 2nd or 3rd week of flower.
NOTE: Usually one treatment with MYCO JORDAN™ as a root drench for established plants in Soil & Coco at an application rate of 1-2 tablespoon(s) per gallon of water will provide sufficient root inoculation for the entire crops life cycle.
NOTE: Some commercial fertilizers and/or mineral salts may be detrimental to the spores.
RECOMMENDATIONS:
- If using a fertilizer at the time of planting, use at half the rate recommended by the manufacturer for best results.
- For indoor growers using drain-to-waste (DTW) applications: Pre-soak the growing medium before applying MYCO JORDAN™ as a root drench to prevent leaching of the spores.
- Avoid excess run off during application.
- Avoid prolonged exposure of the inoculum to direct sunlight.
- Avoid inhalation of the powder inoculum.
- Shelf life of MYCO JORDAN™ is a guaranteed minimum of 2 years. Ideal storage conditions are in a dry cool place at temperature ranges of 45 – 85°F.
