Dosatron Nutrient Delivery System - DAB Starter Kit

This Starter Kit is meant to be used with any booster water pump (it doesn't have to be a DAB pump) so DOES NOT come with a pressure regulator; a pressure regulator serves to protect your injectors (anything higher than 85psi will be detrimental), and a booster pump (usually a DAB pump), would not need a pressure regualtor (as the output pressure is constant, known and preset).

The Starter Kit contains a filter to protect your system ; the neccesary valves so you can carry out maintanence on your filter; a secondary output for water (e.g to make up stock concentrate); check valves. 

To complete you system you will need Dosatron Injectors, a monitoring kit, and the Water Hammer Arrestor Kit.

The components will come loose and need to be made up yourself.

Instructions

1. Wrap 5 to 6 turns of PTFE Tape on all threads. Make sure to wrap clockwise to prevent the tape from unravelling
2. Connect the ¾” x ¼” Reducing Nipple to one port of the cross, followed by the pressure gauge and set aside.
3. Connect a Barrel Nipple to the union side of a ¾” PVC Single Union Threaded Ball Valve then connect an elbow to the Barrel nipple.
4. With the arrow facing down, connect the ¾” BSP Male Y Filter (39-00-20) to the ¾” PVC Single Union Threaded Ball Valve.
5. Add the female socket (021.013.03) to the other end of the Y filter (39-00-20).
6. Attach the cross assembly to the Barrel Nipple
   
7. Insert a Hexagon nipple (021.273.03) on each of the two openings left on the Cross.
8. With the union side up, attach the Ball Valve to the bottom Nipple and connect the hose adaptor to the Ball Valve.
9. Attach an elbow to the Nipple in the centre of the Tee and attach a Barrel nipple  to the elbow.
10. With the arrow facing up, connect the Check Valve (021.673.03Q) to the Barrel