16-17mm LDPE Double Layer Tubing

Tubing for pressure compensated drippers. Get yourself the Floraflex hole puncher to make perfect entry points for the drippers to clip into.  

Note: this is NOT the official Floraflex piping - getting it in to the UK/Europe fast enough is proving difficult but this is similar, works the same...and is a bit cheaper.

Tubing is black on the inside, white on the out, and 16-17mm in diameter.  This double layer hose connects to any of our 16-17mm pipe fittings and serves as a manifold for all FloraFlex Micro Dripper Assembly units.

The white outer layer helps to deflect light and keep the temperature in the hose cooler, the opaque black inner layer blocks all light, preventing algae build-up in the hose and keeping the system clean.

Think of this as the main delivery line in which you punch holes (using this), and then push the micro drippers in them (eg. 2 way micro drip)

If you made holes in this pipe that you want to plug up, use the goof plugs.

Other related useful items:

• 16-17mm Pipe Fitting -3/4" Male Adaptor  (to join to the bubbler)
• 16-17mm Pipe Fitting - Elbow (to connect the tubing to negotiate corners!)
• 16-17 mm Pipe Fitting - Tee (to connect the tubing to spit into two)
• Micro Dripper Assembly - 1 -Way (36") (plugs straight through the 16/17mm pipe to feed your plants)
• Micro Dripper Assembly - 2 -Way (24")  (as above but has two lines coming off it)
• Multi-Flow Bubbler (the 3/4 Male adapter is needed)